Nazad

Ovdje možete pretražiti standarde i srodne dokumente, za pomoć pri pretrazi kliknite na karticu Pomoć.


MEST EN 10289:2018

Referentna oznaka: MEST EN 10289:2018
Naslov: Čelične cijevi i spojni djelovi za cjevovode na kopnu i morskim platformama - Spoljašnje prevlake od epoksida i modifikovanog epoksida nanesene u tečnom stanju
Naslov: (eng.) Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
Abstrakt (eng.): The standard defines the reqiurements of liquid applied external coating, epoxy (EP) and epoxy-modified (EP-MOD), for the corrosion protection of tubes and pipeline fittings. The coating in this standard can be applied to longitudinally or spirally welded and to seamless steel tubes and fittings used for the construction of pipelines for conveying liquids or gases. If the component has to be cold bent the coating shall be applied after bending unless otherwise approved by the purchaser. The coating shall consist normally of one layer of liquid product, applied by brush or by spray airless technique. Other application methods can be recommended by the product manufacturer, in accordance with the kind of product. This coating can be used for the protection of buried or submerged steel tubes for service at the following temperatures and with three thickness classes A (400 *m), B (800 *m) and C(1500 *m) based on the following combination: - type 1 : - 20 °C to 40 °C, thickness class A or B or C - type 2 : - 20 °C to 60 °C, thickness class B or C - type 3 : - 20 °C to 80 °C, thickness class C Other temperatures can be agreed ; in this case, tests shall be carried out at the required temperature. In this standard the word components is used for tubes and fittings. Frequencies of tests on fittings shall be agreed by the parties at the ordering stage. Components coated with these types of coatings may be further protected by means of cathodic protection.
Jezik: engleski
Referentna oznaka originalnog dokumenta: EN 10289:2002
ICS notacija: 67.200.10
Tehnički komitet: Stručno tijelo za standarde
Datum stupanja na snagu: 29-05-2018
Direktive:
Broj strana 46
Cijena: 33€

Pomoć pri pretrazi:

  • Za najbolje rezultate pretrage koristititi kombinacije polja.
  • Polje Referentna oznaka služi za pretragu referentne oznake standarda, cijele ili nekog njenog dijela. Primjeri: MEST EN ISO 9001:2016, MEST EN ISO, MEST EN, 9001, 2016 itd.
  • Pretraga standarda po ICS grupi korišćenjem padajućeg menija ICS grupa ili ukucavanjem oznake u tekstualno polje ICS broj.
  • Dio naslova ili cjelokupni naslov dokumenta je moguće pretražiti ukucavanjem u polje Naziv dokumenta.
  • Moguće je pretražiti više ključnih riječi odvajanjem zarezom ili tačka-zarezom. Svaku od ukucanih ključnih riječi je moguće ukloniti klikom na x.
  • Pretraga standarda po tehničkim komitetima se vrši odabirom tehničkog komiteta iz padajućeg menija.
  • Pretraga direktive se vrši ukucavanjem direktive u tekstualno polje.